Agricultural SiliconeSpray Adjuvant Silicone Surfactant - QS-3240

Agricultural SiliconeSpray Adjuvant Silicone Surfactant - QS-3240

QS-3240 Spray adjuvant is a super spreading surfactant based on polyether modified trisiloxane. It is a silicone surfactant that reduces the surface tension of spray solutions, thereby increasing spray coverage. It has good spreading ; penetrating properties and promotes the rapid absorption of agrochemicals into plants.

Product Description:

Chemical name: Polyalkylene modified heptamethyltrisiloxane

As an agricultural spraying adjuvant, organic silicon surfactant can enhance the adhesion and permeability of pesticides, improve the absorption rate and insecticidal effect of pesticides, so as to achieve better control effect.

 

1. Improve adhesion: Silicone surfactants can improve the adhesion of pesticides on crop surfaces by reducing surface tension and increasing adhesion.

Not only can the dripping and evaporation of pesticides on the crop surface be reduced, but also the pesticide can be more evenly distributed over the entire crop surface during spraying.

2. Improve penetration: Silicone surfactants can reduce the surface tension of pesticide solutions and increase liquid penetration, thereby helping pesticides penetrate into crops and achieve better control effects.

3. Improve scrub resistance: Silicone surfactants can increase the water resistance and scrub resistance of pesticides, reducing the possibility of pesticides being washed away by rain after spraying.

4. Reduce the use of pesticides: Silicone surfactants help pesticides to better adhere to the crop surface, so it can reduce the use of pesticides and achieve more economical and environmentally friendly purposes.

 

The application of QS-3240 silicone surfactant as an agricultural adjuvant can improve the absorption efficiency and insecticidal effect of pesticides, reduce the use of pesticides, and reduce the risk of environmental pollution at the same time.

Features:

CAS No. 134180-76-0
Active content percent 100%
Appearance Clear, little yellow liquid
Cloud Point(0.1 wt%) <10°C
Refractive index at 25°C 1.435-1.445
Freezing point < 2°C
Viscosity at 25°C(77°CF) 10-60cSt
Surface tension(0.1% aq.) 19.5-22mN/m
Package 1000kgs, 200Kgs, 50Kgs, or 25Kgs/drum, or package customize
Storage Store in dry place, avoid exposing to the sun
  • 100% silicone adjuvant
  • Super wetter and spreader
  • Also known as trisiloxane alkoxylate or polytrisiloxane
  • Promote spray volume reduction
  • Improve rain resistance
  • Improve the absorption rate of pesticides on leaves
  • Improve crop penetration
  • Improve the efficiency of agrochemical solution
  • Cost saving
  • Meet long-term environmental protection standards

 

Product Use:

1. In pesticide formulations:QS-3240 spray adjuvant can be used as a component of agrochemical formulations.

Although silicone surfactants are hydrolyzed under acidic or alkaline conditions. Optimum performance is achieved by buffering the formulation to pH 6.5 - 7.5.

In addition, it is recommended that QS-3240 Spray Auxiliary be used at a concentration of 0.5-8% of the total formulation under certain conditions.

 

2. As a tank mix aid: QS-3240 spray adjuvant, when used as a tank mix adjuvant, can be used to increase spray coverage, increase absorption or reduce spray volume.

QS-3240 Spray adjuvant is most effective as a tank mix  adjuvant when the spray mixture is 1) within the pH range of 5-8, and 2) used within 24 hours of preparation.

High spray volumes, combined with high surfactant levels, do not require adequate coverage of QS-3240 Spray adjuvant.

 In fact, QS-3240 Spray adjuvant has the possibility to provide adequate coverage in many low volume spray applications at rates of 0.025% to 0.1%.

 

Application:

Plant Growth Regulator
Herbicide
Fungicide
pesticide
Acaricide

 

 

Related recommendations