Product Description:
The product is a mixture of polyether-modified organosilicon and polyepoxide modified heptamethyltrisiloxane. It is a super-spreader agent for agricultural use, which can be added to pesticide formulations or tank mix sprays.
At a concentration of 0.1% (WT), it can reduce the surface tension of water by 20.5mN/m.
When mixed with a pesticide solution in a certain proportion, the organosilicone surfactant can reduce the contact angle between the spray liquid and the plant leaves, increase the coverage of the spray, and promote the absorption of pesticides through the stomata of plant leaves, thereby improving the efficacy of the pesticides and reducing their use.
This product is especially suitable for fungicides, insecticides, water-soluble broadleaf herbicides, and plant growth regulators. It can enhance the permeability and adsorption of pesticides, thereby improving their effectiveness, reducing the amount of use, and saving costs while minimizing their impact on the environment and ecosystems.
Product Features:
● 100% organosilicone adjuvant
● Super -wetter and spreader
● Promotes spray volume reduction
● Increase Rainfastness
● Increase the uptake speed of the pesticides into the leaf
● Improve the crop penetrating
● Enhance efficiency of agrochemical fluid
● Save cost
● Conform to long-term environmental protection standard
| CAS No.67674-67-3 | |
| Active content percent | 99.8% |
| Appearance | Clear, little yellow liquid |
| Cloud Point(0.1 wt%) | <10°C |
| Refractive index at 25°C | 1.435-1.445 |
| Freezing point | < 2°C |
| Viscosity at 25°C(77°CF) | 10-60cSt |
| Surface tension(0.1% aq.) | 19.5-22mN/m |
| Package: | 1000kgs, 200Kgs, 50Kgs, or 25Kgs/drum, or package customize |
| Storage: | Store in dry place, avoid exposing to the sun. |
Application:
Insecticides, Fungicides, Herbicides, Foliar Fertilizers, Plant Growth Regulators
Instructions for use:
As a tank mixing aid: add silicone additive QS-302 (5000~10000 times) 3~1.5g to15kg spray liquid, and use a small-aperture nozzle.
In the pesticide formulation: we recommend that the dosage be 0.5%-8% of the original pesticide, and adjust the pH value of the pesticide formulation to 6-8.
